Most SnowPeeler accessories fit every model. Only the replacement snow slides are model-specific. Use this table to find the right part.
| Accessory | What it does | Fits |
|---|---|---|
| Handle extension kit, 10 ft (3 m) | Adds 2 aluminum poles of 5 ft (1.5 m) for more reach | All models |
| Curved handle adapter | 8° bend that keeps the frame on the roof beyond 20 ft (6 m); included with the Premium | All models |
| XL slide kit, 15 ft (4.5 m) | Longer slide with counterweight for low-slope roofs, valleys and rooftop use | SnowPeeler roof rakes |
| Replacement snow slide, 9 ft (2.75 m) | Standard slide for the Classic | Classic (models 3000, 3013, 3015) |
| Replacement snow slide, 10 ft (3 m) | Standard slide for the Premium | Premium (model 3003) only |
| Glide pads (set of 2) | 2 in (6 cm) of clearance to protect the roof; wear part | All models |
| Braces kit (set of 2) | Extra rigidity in packed or hardened snow | All models |
| Drift cutter | Splits snow blocks so they don't land on you; included on current models | All models |
| Reversible frame adapter | Sets up the SnowPeeler for ground or rooftop use; included with every SnowPeeler | All models |
Which accessory do you need?
- More reach: handle extension kit, plus the curved handle adapter if you work beyond 20 ft (6 m).
- Low-slope roof or roof valley: curved handle adapter and XL slide kit. Read our low-slope roof guide.
- Packed or hardened snow: braces kit.
- Worn parts: glide pads and snow slide. See care and replacement parts.
Browse every part in our accessories and parts collection. Not sure which model you have? Contact us.
Share:
Clearing Snow From Low-Slope Roofs and Roof Valleys